A high quality coating, supplied ready for use and which imparts excellent elasticity and high filling power specifically developed for use on boats, yachts and marine craft. High resistance to cracking and delamination. Suitable for both interior and exterior use, even on exotic woods. Enriched with UV filters, it forms a protective film of considerable thickness, resistant to water and adverse weather. For the preliminary coloring of the surface it is possible to apply the Borma Holz Lasur Primer, then finish with two coats of Flatting Extra Marine. To enhance its exterior durability, Flatting Extra Marine can be directly colored with Borma Oil Pigments.

A Water-based finish for exterior wood coatings especially boats, yachts and marine craft. Available in gloss and matt, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of Borma Naturaqua Holz Lasur Exterior Woodstain.

A Clear, non-peeling water-based finish based on high-flexibility resins with additional UV filters for the protection and decoration of wood. Suitable for wooden houses, windows, pergolas, ceilings, paneling, ... Yield: 8 - 12 m² / Lt Operating temperature: + 5C / + 30C. The fine formulation prevents the formation of chromofore molds and prevent the attack of lignivorous insects, guaranteeing an excellent resistance to atmospheric agents. Its natural density facilitates brush application.

Ideal for use over Borma Naturaqua Holzwachs Lasur Impregnating Wood Stains.

It does not contain Lindane and PCP

A waterborne, self-sealing finish for exterior woodwork and cladding with good moisture permeability. A 3 -in-1 product which impregnates, protects and decorates. Odourless and fast drying with low VOC. Also suitable for interior use.

Fast drying single-component basecoat with remarkable adhesion and transparency. The product is ideal as a first coat for painting or as a base for a wax treatment. The ready-to-use gel product facilitates application on vertical surfaces, avoids dripping and allows, thanks to its high solid content, excellent results even if diluted.

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative for natural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.