Single-component, water-based whitening/bleaching agent for wood. Applied by brush or spray, it allows to lighten and uniform the tone of any wood, for indoor or outdoor use. The product is ready for use; effects with greater or lesser intensity can be achieved by diluting the product with water.
A high quality coating, supplied ready for use and which imparts excellent elasticity and high filling power specifically developed for use on boats, yachts and marine craft. High resistance to cracking and delamination. Suitable for both interior and exterior use, even on exotic woods. Enriched with UV filters, it forms a protective film of considerable thickness, resistant to water and adverse weather. For the preliminary coloring of the surface it is possible to apply the Borma Holz Lasur Primer, then finish with two coats of Flatting Extra Marine. To enhance its exterior durability, Flatting Extra Marine can be directly colored with Borma Oil Pigments.
A natural oil-based product, supplied ready for use and suitable for all wooden surfaces, both indoors and outdoors. It imparts excellent water-repellency and maintains a pleasant, natural appearance on the surface. Also suitable for immersion. Protects surfaces from atmospheric and biological agents and enhances the natural beauty of wood. Colorless or pigmented. It does not delaminate or peel and does not require sanding. It can be used alone as a periodic surface treatment or as a colored primer before transparent oil finishes(such as Borma Decking Oil HD ).
A special water based detergent to restore wood to its natural colour. It removes the grey patina caused by the decomposition of lignin due to exposure to ultraviolet radiation. Pre-wet the surface with water to aid penetration, apply No Grey liberally with a brush or garden sprayer, leave for 5-10 minutes to activate and then massage the surface with a stiff brush. Rinse well with water after application and allow to fully dry before application of any subsequent coatings.
Ideal for decking, terraces, garden furniture, fences and any other outdoor wooden items.
The result is immediate. If the greying is very stubborn the process can be repeated without causing damage.
Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents. It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors). The addition of pigments increases the duration of the coating.
A high-end, technically advanced decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents the product is characterised by its extreme ease of application and subsequent maintenance, even when coloured. It requires no sanding and provides a professional finish as opposed to a typical DIY Deck Coating.
