A high quality coating, supplied ready for use and which imparts excellent elasticity and high filling power specifically developed for use on boats, yachts and marine craft. High resistance to cracking and delamination. Suitable for both interior and exterior use, even on exotic woods. Enriched with UV filters, it forms a protective film of considerable thickness, resistant to water and adverse weather. For the preliminary coloring of the surface it is possible to apply the Borma Holz Lasur Primer, then finish with two coats of Flatting Extra Marine. To enhance its exterior durability, Flatting Extra Marine can be directly colored with Borma Oil Pigments.

Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents. It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors). The addition of pigments increases the duration of the coating.

With minimal environmental impact Borma Decking Oil HD is virtually odorless, highly transparent and protects all types of wood. Characterised by rapid drying it gives wooden surfaces a pleasant decorative effect. UV filters and special additives make it suitable for outdoor use. Recommended as a transparent finish, it can be applied on various colored products to increase the protection coefficient, for example Borma Holz Lasur, Borma Holzwachs Lasur, Borma Teak Oil and Borma Terrace Oil.

A high-end, technically advanced decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents the product is characterised by its extreme ease of application and subsequent maintenance, even when coloured. It requires no sanding and provides a professional finish as opposed to a typical DIY Deck Coating.

Regenerates every type of surface, giving additional protection to the original oil finish of the product. The presence of UV filters and special additives protect the wood from harmful agents, direct sunlight and bad weather. Enhances its natural beauty with a natural satin effect.

A Water-based finish for exterior wood coatings especially boats, yachts and marine craft. Available in gloss and matt, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of Borma Naturaqua Holz Lasur Exterior Woodstain.