Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents. It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors). The addition of pigments increases the duration of the coating.

A high solid water-based sealer specifically designed for protecting the ends of beams, poles and other wooden structures exposed to humidity and weathering. Also suitable for sealing longitudinal cracks. It prevents the penetration of moisture into the wood, preventing the formation of mold and thus extending the life of the protective coating and of the product in general. Transparent, it has excellent resistance to UV degradation. The product can be colored with Waterbased Pigments if required. Apply as a first product or as an intermediate in the case of traditional water or solvent-based finishing cycles. Apply as a last product in the case of oil finishing cycles, to allow this material to penetrate into the wood.

A finely formulated water-based exterior woodstain designed to penetrate into the fibrous layers of the woods surface providing a high level of primary protection. Complete the working cycle with the desired finish (e.g. Borma Naturaqua Top Gel). Recommended for both exterior and interior applications.

A Water-based finish for exterior wood coatings especially boats, yachts and marine craft. Available in gloss and matt, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of Borma Naturaqua Holz Lasur Exterior Woodstain.

The product has been formulated to protect new wooden structures, pending subsequent finishing treatments (generally in the winter season). It prevents the greying of wood, effectively protects against the formation of mold and fungus and
from insect infestation in the period in which the wood is left without finishes. It does not alter its natural color. Characterized by an excellent penetration capacity, it allows the subsequent application of oils and any other finishing. The product can also be used as a pre-treatment before the use of impregnants, enamels or oils. Thanks to the considerable content of active ingredients and the high penetration capacity, the material guarantees superior protection and extends the duration of the coating over time. External use.

A superior 3-in-1 Oil-Wax based exterior self sealing finish: a single product that impregnates, protects and decorates. It is applied in two or three coats on rough wood. It does not need intermediate sanding. It is maintained with a simple overlay. Suitable for ceilings, beams, external wood cladding, fixtures, fences, pergolas, etc. Available as a clear finish or in translucent popular colours