With minimal environmental impact Borma Decking Oil HD is virtually odorless, highly transparent and protects all types of wood. Characterised by rapid drying it gives wooden surfaces a pleasant decorative effect. UV filters and special additives make it suitable for outdoor use. Recommended as a transparent finish, it can be applied on various colored products to increase the protection coefficient, for example Borma Holz Lasur, Borma Holzwachs Lasur, Borma Teak Oil and Borma Terrace Oil.

A high-end, technically advanced decking oil formulated on the basis of reinforced natural oils with a high penetration coefficient. Thanks to its low viscosity it penetrates deep into the wood and thanks to the high solid content it gives an effective and breathable protection with a natural satin effect. Enriched with UV filters and protective additives against harmful wood agents the product is characterised by its extreme ease of application and subsequent maintenance, even when coloured. It requires no sanding and provides a professional finish as opposed to a typical DIY Deck Coating.

Regenerates every type of surface, giving additional protection to the original oil finish of the product. The presence of UV filters and special additives protect the wood from harmful agents, direct sunlight and bad weather. Enhances its natural beauty with a natural satin effect.

A technically advanced water-based oil dispersion reinforced with high quality resins for both indoor and outdoor use. Almost completely odorless the product gives a non-greasy, perfectly water-repellent protective film with a pleasant satin-like appearance. Easy to apply. With UV filters. It is recommended not to apply in hot, sunny weather or if the wood surface is warm.

A natural oil-based product, supplied ready for use and suitable for all wooden surfaces, both indoors and outdoors. It imparts excellent  water-repellency and maintains a pleasant, natural appearance on the surface. Also suitable for immersion. Protects surfaces from atmospheric and biological agents and enhances the natural beauty of wood. Colorless or pigmented. It does not delaminate or peel and does not require sanding. It can be used alone as a periodic surface treatment or as a colored primer before transparent oil finishes(such as Borma Decking Oil HD ).

Based on natural oils, enriched with UV filters, the product guarantees protection to all external surfaces without the release of VOC and with a pleasantly natural effect. Not peeling and suitable for all types of wood, it contains active ingredients that protect the support from harmful agents. It is possible to color the product with oil pigments (3-5% for semi-transparent colors, 10-15% for covering colors). The addition of pigments increases the duration of the coating.