Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative for natural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

Pigmented Water-based Primer for the pre-treatment of wooden surfaces specifically formulated to prevent tannin-bleed or tannin staining. It is ideal as a first basic treatment especially on woods with a high tannin content such as oak, walnut and cherry. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

A high quality coating, supplied ready for use and which imparts excellent elasticity and high filling power specifically developed for use on boats, yachts and marine craft. High resistance to cracking and delamination. Suitable for both interior and exterior use, even on exotic woods. Enriched with UV filters, it forms a protective film of considerable thickness, resistant to water and adverse weather. For the preliminary coloring of the surface it is possible to apply the Borma Holz Lasur Primer, then finish with two coats of Flatting Extra Marine. To enhance its exterior durability, Flatting Extra Marine can be directly colored with Borma Oil Pigments.

A Water-based finish for exterior wood coatings especially boats, yachts and marine craft. Available in gloss and matt, with classic decorative effect. Also suitable for interior surfaces (paneling, ceilings, ...). It is usually applied after a first coat of Borma Naturaqua Holz Lasur Exterior Woodstain.

A special water based detergent to restore wood to its natural colour. It removes the grey patina caused by the decomposition of lignin due to exposure to ultraviolet radiation. Pre-wet the surface with water to aid penetration, apply No Grey liberally with a brush or garden sprayer, leave for 5-10 minutes to activate and then massage the surface with a stiff brush. Rinse well with water after application and allow to fully dry before application of any subsequent coatings.
Ideal for decking, terraces, garden furniture, fences and any other outdoor wooden items.
The result is immediate. If the greying is very stubborn the process can be repeated without causing damage.

Single-component, water-based whitening/bleaching agent for wood. Applied by brush or spray, it allows to lighten and uniform the tone of any wood, for indoor or outdoor use. The product is ready for use; effects with greater or lesser intensity can be achieved by diluting the product with water.