Pigmented Water-based Primer for the pre-treatment of wooden surfaces specifically formulated to prevent tannin-bleed or tannin staining. It is ideal as a first basic treatment especially on woods with a high tannin content such as oak, walnut and cherry. Its characteristics allow an excellent adhesion on the wood making it an ideal base to prevent yellowing and the appearance of dark spots on the surface, especially in the case of water-based finishing cycles in light colors

A technically advanced water-based oil dispersion reinforced with high quality resins for both indoor and outdoor use. Almost completely odorless the product gives a non-greasy, perfectly water-repellent protective film with a pleasant satin-like appearance. Easy to apply. With UV filters. It is recommended not to apply in hot, sunny weather or if the wood surface is warm.

A Clear, non-peeling water-based finish based on high-flexibility resins with additional UV filters for the protection and decoration of wood. Suitable for wooden houses, windows, pergolas, ceilings, paneling, ... Yield: 8 - 12 m² / Lt Operating temperature: + 5C / + 30C. The fine formulation prevents the formation of chromofore molds and prevent the attack of lignivorous insects, guaranteeing an excellent resistance to atmospheric agents. Its natural density facilitates brush application.

Ideal for use over Borma Naturaqua Holzwachs Lasur Impregnating Wood Stains.

It does not contain Lindane and PCP

Transparent acrylic lacquer for indoor and outdoor use. It creates an almost invisible film for a rough wood effect. Fields of application: as an insulator to guarantee good adhesion of water-based finishes on oily exotic woods such as teak, iroko and similar; as a surface fixative for natural effect finishes . Catalyze the product with Borma 4100-2K at 10% to improve its adhesion and surface resistance.

Fast drying, single-component Nitrocellulose (NC) sanding basecoat with remarkable adhesion and transparency. The product is ideal as a first coat for overcoating with a wide range of lacquers, varnishes ad especially as a base for wax applications. The ready-to-use gel product facilitates application on vertical surfaces, avoids dripping and allows, thanks to its high solid content, excellent results even if diluted. It can be sprayed or brushed whilst it's gel-like consistency makes it highly suitable for hand-application when woodturning. Thinnable with Nitrocellulose Thinners or Acetone.

Special oil for the staining of uncoated wood prior to finishing. Neutral or colored, it is an excellent base in the finishing cycles of furniture and floors and over-coated with Furniture Oil, Parquet Oil, Parquet Lacquer or waxes from the Borma Range. Its low viscosity, good open-time and easy workability allows larger areas to be stained evenly and without  patchiness. For optimum results flooring/furniture should be stained sectionally, and in the direction of the grain.Colors resistant to light.

Grundieroil White is perfect for the base colour when wanting a whitewash or white effect on flooring.

Special bespoke colour matching service available on request.

A set of 12 x 50ml colour samples is available - lead time 1 week from order.